Contents
To read your meter, simply read the black and white numbers from left to right – the black numbers represent kilolitres (1,000 litres) and the red numbers represent litres. We charge per kilolitre. To monitor your readings: Read your meter approximately the same time each day (note both the black and red numbers).
Beside above, how do I read my water meter? On the meter face there are two sets of numbers, black on the left and red on the right. The black numbers show the number of cubic metres used, while the red ones and the dials show litres. When submitting a meter reading, only read the black numbers and ignore the red numbers (one cubic metre = 1,000 litres).
Also, how do you read a water meter in Australia?
You asked, what do the numbers mean on my water meter? The meter read equals the gallons (or cubic feet) used while the flow rate equals the number of gallons (or cubic feet) per minute flowing through the water meter.
Best answer for this question, how do you read a modern water meter?
Can I read my own water meter?
To read a water meter in gallons, take note of the number at the bottom of your water meter. … The meter above is an analog meter that reads: 302152 gallons. Some analog water meters read water usage in cubic feet, instead of gallons, and incorporate a decimal point, reading like an odometer in a car.
What are the red digits on a water meter?
The numbers in the red boxes record tenths and hundredths of a cubic metre. Try to read the meter at the same day and time every week. This will allow you to accurately calculate how much water you are using.
How do you read a cubic meter of water?
Reading your water meter is like reading the odometer of your car. Read all of the numbers from left to right that appear under the words “Cubic Feet.” The first digit on the right represents one cubic foot. The second from the right represents 10 cubic feet.
How do you read a digital residential water meter?
How do you read a master meter water meter?
How do you read a water meter with multiple dials?
How do I know which water meter is mine?
Outside the external boundary box or inside the property where the supply pipe meets the internal stop tap are where the water meters are located. There is a serial number on the front of the water meter. Your bill will show your meter serial number.
How do you open a water meter cover?
How can I measure water usage at home?
Estimating Water Use Without A Meter To calculate flow for faucets (indoor and outdoor) and showerheads, turn faucet to the normal flow rate that you use, and hold a container under the tap for 10 seconds and measure the quantity of water in the container.
How do I read my water meter x100?
They typically say things like “x 10”, “x 100”, “x 1,000” etc. Start with the highest number. In our example, that’s the “x 100,000” dial and it is set to “2”. Our first number is 2, which represents 200,000 (2 x 100,000) then go to the next highest numbered dial.
How do you read a new smart water meter?
How do you read an old water meter?
To read the round-reading meter, begin with the dial labeled 100,000 and read clockwise to the dial labeled 1,000. If the hand on any dial is between two numbers, use the lower number. The hands on individual dials may rotate either clockwise or counter clockwise.
